High Pressure Din Sandards Pn16 UPVC Pipe Fitting Male Adapter For Industrial Water Treatment

1)Medium:Water

2)Material:UPVC

3)Connection: Glue

4)Pressure:PN16 (1.6 mpa)

5)Size:20 mm – 63 mm

6)Standard:gb10002.2 – 1998;iso4422.2 – 1996

7) Advantages: light weight, high strength, high flow capacity, easy installation, durable, economic, non-toxic, corrosion resistant, recyclable, environmental protection

8) physical properties: density 1350-1460; Vicat softening temperature ≥ 74;

Water absorption ≤ 40; oven test, no signs of bubbles or cracks

9) mechanical properties: drop test, all specimens without cracks; Hydraulic test, no leakage

We are able to supply PVC Male Adapter in the range of 20-63 mm manufactured to ISO 4422.2-1996 standards.

PVC Male Adapter is a kind of direct pipe fittings. One end is directly connected to the pipe, and the other end has an external thread, which can be connected to other equipment on the pipe (pressure gauge, flow meter, etc.).

The mass of PVC material is only 1/5 of iron, which makes it very easy to handle, load and unload and construct in comparison.
PVC material has good resistance to acid, alkali, and corrosion. The strength of water pressure resistance, external pressure resistance, and impact strength is high. It is especially suitable for the chemical industry, sewage treatment, industrial fluid transportation, swimming pool, etc.
PVC piping system has a smooth surface, low fluid resistance, a high flow rate in the same caliber, and no scale adherence.

Please note ：

That the pipe is installed inside the fitting and we measure the outside diameter when measuring the pipe and the inside diameter for the fitting.