1)Medium:Water

2)Material:UPVC

3)Connection: Glue

4)Pressure:PN16 (1.6 mpa)

5)Size:20 mm – 315 mm

6)Standard:gb10002.2 – 1998;iso4422.2 – 1996

7) Advantages: light weight, high strength, high flow capacity, easy installation, durable, economic, non-toxic, corrosion resistant, recyclable, environmental protection

8) physical properties: density 1350-1460; Vicat softening temperature ≥ 74;

Water absorption ≤ 40; oven test, no signs of bubbles or cracks

9) mechanical properties: drop test, all specimens without cracks; Hydraulic test, no leakage

The PVC reducing tee connects pipes with different diameters in the third gear, one of which has a smaller diameter, which can adjust the pressure and flow in the pipe.

We can provide the following products within the range of 20-315 mm manufactured in accordance with the ISO 4422.2-1996 standard. PVC 90 Deg Elbow, PVC 45 Deg Elbow, PVC Coupling, PVC Tee, PVC 4 Way Cross, PVC Reducing Tee, PVC Flange.

The mass of PVC material is only 1/5 of iron, which makes it very easy to handle, load and unload and construct in comparison.
PVC material has good resistance to acid, alkali, and corrosion. The strength of water pressure resistance, external pressure resistance, and impact strength is high. PN16 Pressure UPVC Pipes and Fittings, It is especially suitable for the chemical industry, sewage treatment, industrial fluid transportation, swimming pool, etc.
PVC piping system has a smooth surface, low fluid resistance, a high flow rate in the same caliber, and no scale adherence.

Please note ：

That the pipe is installed inside the fitting and we measure the outside diameter when measuring the pipe and the inside diameter for the fitting.